B1806

DTC B1806: Power Seat Control Unit Lost Communication with MICU (MICU Message)

NOTE:
- If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.
- Make sure you have the latest software on the HDS before troubleshooting.

1. Turn the ignition switch ON (II) and clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Check for DTCs with the HDS.

Is DTC B1806 indicated?

YES - Go to step 4.

NO - Intermittent failure. The driving position memory system is OK at this time. Check for loose or poor connections and pin fit at the power seat control unit connector, at the MICU connector, battery condition, battery cable connections, and ground G601.

4. Check for DTCs with the HDS.

Are DTCs B1055, B1106, B1157, and/or B1255 also indicated?

YES - Do the MICU input test.

NO - Do the power seat control unit input test.