Resetting the Engine Oil Life Display

Resetting the Engine Oil Life Display

Reference:

- For an explanation of Maintenance Minder Codes and what service should be performed, refer to the articles under "Maintenance Reminder Service Codes".

Reset the display after completing the required maintenance service. You will see "OIL LIFE 1OO%" on the display the next time you turn the ignition switch to the ON (II) position.

Once the maintenance service has been performed reset the maintenance minder as follows:

1. Turn the ignition switch to the ON (II) position.

2. If the engine oil life display is not displayed. press the SEL/RESET button oil the steering wheel repeatedly until it comes back.






3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi-information display.

- To reset the engine oil life, press the INFO button on the steering wheel to select "RESET" on the display, and press the SEL/ RESET button.

- To cancel resetting the oil 1ife, press the INFO button on the steering wheel to select "CANCEL" on the display, and press the SEL/RESET button.

If you do not complete the reset procedure within 30 seconds after selecting the reset mode, the mode will be canceled automatically.

Important Maintenance Precautions

If you perform the required service is performed but do not reset the display, or reset the display without performing the service, the system will not show the proper maintenance intervals. This can lead to serious mechanical problems because there will no longer be an accurate record of when maintenance is needed.


For more comprehensive information on reading, interpreting and resetting the MAINTENANCE SERVICE MINDERS viewed on the instrument display, Service Intervals