Immobilizer Control Unit-Receiver Replacement
Immobilizer Control Unit-Receiver Replacement1. Remove the driver's dashboard undercover, and the driver's dashboard lower cover.
2. Remove the steering column covers.
3. Remove the ignition switch knob (A).
4. Disconnect the 7P connector (B) from the immobilizer control unit-receiver (C).
5. Remove the two screws and the immobilizer control unit-receiver from the ignition key cylinder (D).
6. Install the immobilizer control unit-receiver in the reverse order of removal.
7. After replacement, the immobilizer control unit-receiver must be registered in IMMOBILIZER with the HDS (all keys and the PCM code are required).