Navigation System: Service and Repair

DVD-ROM/CD-ROM Replacement

NOTE: Go on-line and check for any service bulletins or other service information about the navigation system.

1. Turn the ignition switch ON (II).
2. Push the open button (A) of the navigation unit located on the left side of the trunk.






3. Press the EJECT button (B).
4. Remove the DVD-ROM/CD-ROM.
5. Insert the new DVD-ROM/CD-ROM with the white label facing up.
6. Close the front cover. Do not turn the ignition switch OFF; watch the navigation screen until the data is downloaded to the navigation unit.
7. Do the Map Matching.

NOTE: After servicing, the front cover and PC card slot door must be closed.