General Specifications
Cylinder Head6 Point
Tighten bolts sequentially in three steps:
1st Step Torque 39 N-m (4.0 kgf-m, 29 lbf-ft)
2nd Step Torque 69 N-m (7.0 kgf-m, 51 lbf-ft)
3rd Step Torque 98.1 N-m (10.0 kgf-m, 72.3 lbf-ft)
12 Point
Torque in sequence 29 N-m (3.0 kgf-m, 22 lbf-ft).
After torquing, tighten in 2 steps (90° per step).
New bolt extra 90°.
Measure the diameter of each cylinder head bolt at point A and point B.
If either diameter is less than 11.3 mm (0.44 in.), replace the cylinder head bolt.
Surface Variation
Warpage less than 0.05 mm (0.002 in.) no resurfacing
Warpage is 0.05 mm (0.002 in.) to 0.2 mm (0.008 in.) resurface
Max. resurface limit 0.2 mm (0.008 in.)
based on a height of 121 mm (4.76 in.).
Camshaft Gear/Sprocket
