Door Switch Test
Door Switch TestDriver's Door
1. Remove the driver's door panel.
2. Disconnect the 2P connector (A) from the door switch (B).
3. Check for continuity between the No. 1 and No. 2 terminals.
- There should be continuity with the door open.
- There should be no continuity with the door closed.
4. If the continuity is not as specified, replace the door lock actuator.
Front Passenger's and Rear Door
1. Remove the front passenger's door panel or rear door panel.
2. Disconnect the 2P connector (A) from the door switch (B).
3. Check for continuity between the No. 1 and No. 2 terminals.
- There should be continuity with the door open.
- There should be no continuity with the door closed.
4. If the continuity is not as specified, replace the door lock actuator.