Turn Signal Bulb: Service and Repair
Front Turn Signal Light Bulb1. Make sure you have the anti-theft codes for the audio system and navigation system (if equipped). Make sure the ignition switch is OFF.
2. Remove the left or right upper fender trim.
3. For the left light, remove the battery cover, remove the battery hold-down by removing the two nuts, then slide the battery to access the bulb.
4. Disconnect the 3P connector (A) from the bulb socket (B).
5. Turn the bulb socket 45° counterclockwise to remove it from the headlight housing.
6. Install a new bulb in the reverse order of removal.
7. If the battery is disconnected, do the steering column position memorization, and enter the anti-theft codes for the audio system and navigation system (if equipped), and set the clock.