Steering Angle Sensor: Service and Repair

Steering Angle Sensor Replacement

NOTE: Do not damage or drop the combination switch as the steering angle sensor is sensitive to shock and vibration.

1. Make sure the ignition switch is OFF.
2. Remove the steering wheel.
3. Remove the steering column cover and combination switch assembly.
4. Remove the combination light switch (A) and the wiper/washer switch (B).





5. Replace the combination switch body complete (C).
6. Install the combination switch in the reverse order of removal.

NOTE: Do not remove the steering angle sensor from the combination switch body.

7. Do the SH-AWD steering neutral position memorization procedure.
8. Do the adaptive front lighting control unit learning procedure.