Shift Lever Mechanism

Shift Lever Mechanism

The shift lever has five positions; P, R, N, D, and D3. D has two modes; automatic shift mode and sequential shift mode with the shift lever moved to M. The shift lever movement and position is indicated by the A/T gear position indicator panel. The shift lock/reverse lock mechanism is an additional shift lever lockout mechanism; the shift lever can be shifted out of P and into R without pressing the shift lever. The shift lever is engaged with the shift lever link in P, R, N, D, and D3. This unit shifts the transmission using the shift cable connected between the shift cable link and the transmission control shaft.

In M, the shift lever is disengaged from the shift lever link, and the shift lever can be used to shift gears manually between 1st through 5th, much like a manual transmission.





Shift Lever Mechanism in M
When the shift lever shifts to M, the shift lever is disengaged from the shift lever link/shift lever pivot, and the shift lever link lock pops up to engage with the shift lever bracket base; the shift lever link/shift lever pivot and shifting position in the transmission are held in D.

The shift lever link lock is spring loaded, it pops up in M, and does not engage the shift lever link/shift lever pivot in any position except M.





The shift lever fits into M by using a detent plunger with a spring. When shifting to upshift and downshift positions, the detent plunger is depressed by the detent bracket inner wall, and detent plunger spring puts the shift lever back into the neutral position. The detent plunger also works in P.