Dynamic Damper Replacement

Dynamic Damper Replacement
Special Tools Required
- Bearing separator 07KAF-PS30200

1. Remove the inboard joint and outboard joint.
2. Mark the following position on the driveshaft (A).
Left driveshaft: 319.5 - 323.5 mm (12.58 - 12.74 inch)
Right driveshaft: 301.5 - 305.5 mm (11.87 - 12.03 inch)





3. Remove the dynamic damper (A) using the special tool and a press as shown.





4. Install the dynamic damper (A) to the marked position using the special tool and a press as shown.





5. Install the inboard joint and outboard joint.