Sunroof / Moonroof: Service and Repair

Glass Replacement

1. Close the glass fully.
2. Slide the sunshade all the way back.




3. Make sure that the tips of the molding (A) are pointing up. Using a T25 TORX bit, remove the bolts (B) from both glass brackets (C).




4. Remove the glass (A) by lifting it up. Do not damage the roof panel.
5. Install the glass in the reverse order of the removal, and note these items:
- Apply liquid thread lock to the glass mounting bolts before reinstallation.
- Do the moonroof calibration.
- Adjust the glass position alignment.

6. Check for water leaks. Use free-flowing water from a hose without a nozzle. Do not use high-pressure water.

NOTE: It is normal for some water to seep past the moonroof into the moonroof frame and exit out through the drains.