Passenger's Dashboard Trim

Passenger's Dashboard Trim Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Take care not to scratch the dashboard and related parts.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Be very careful not to bend the trim.




1. Pry up on the outside edge of the passenger's dashboard trim (A) very carefully to detach the clips, then remove the trim.
2. Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.