TPMS Indicator Does Not Come On, and No DTCs Are Stored

TPMS indicator does not come on, and no DTCs are stored

1. Turn the ignition switch OFF.
2. Disconnect TPMS control unit connector B (20P).
3. Turn the ignition switch ON (II).
4. Check the TPMS indicator when the ignition switch is turned ON (II).

Did the indicator come on?

YES - Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit, and recheck.

NO - Do the troubleshooting for the gauge control module.How to Check For DTCs With the Honda Diagnostic System If necessary, substitute a known-good gauge control module, and recheck.