Leading Arm Replacement

Leading Arm Replacement

1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the rear wheel.
3. Remove the mounting bolts, then remove the leading arm (A).

NOTE: During installation, install new mounting bolts.





4. Install the leading arm in the reverse order of removal, and note these items:

^ First install all the components, and lightly tighten the bolts, then raise the suspension to load it with the vehicle's weight before fully tightening to the specified torque values.
^ Before installing the wheel, clean the mating surfaces on the brake disc/drum and the inside of the wheel.
^ Check the wheel alignment, and adjust it if necessary.