Rear Suspension
Stabilizer Bar Replacement1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the rear wheels.
3. Disconnect the stabilizer links from the stabilizer bar (A) on the right and left sides.
4. Remove the flange bolts and the bushing holders (B), then remove the bushings (C) and the stabilizer bar.
5. Install the stabilizer bar in the reverse order of removal, and note these items:
^ Note the right and left direction of the stabilizer bar.
^ Do not set the bushings (A) on the bent or curved part of the stabilizer bar (B).
^ Note the direction of installation for the bushings.
^ Refer to stabilizer link removal/installation to connect the stabilizer to the links.
^ Before installing the wheel, clean the mating surfaces of the brake disc/drum and the inside of the wheel.
^ Check the wheel alignment, and adjust it if necessary.
