Shift Lever Removal

Shift Lever Removal

1. Remove the center console.
2. Shift the transmission into R.
3. Remove the nut securing the shift cable end.





4. Press the holder lock release (A), and pull out the socket holder (B) to remove the shift cable (C) from the shift lever bracket base (D). Do not remove the shift cable by pulling on the shift cable guide (E).





5. Disconnect the shift lock solenoid connector (A) and the transmission gear selection switch/park pin switch/A/T gear position indicator panel light connector (B).





6. Remove the harness clamps (C).
7. Remove the shift lever assembly.