Intermediate Shaft Disassembly
Intermediate Shaft DisassemblySpecial Tools Required
^ Support base attachment 07LAF-SM40300
^ Half shaft base 07NAF-SR30101
^ Attachment, 42 x 47 mm 07746-0010300
^ Driver 07749-0010000
^ Oil seal driver 07947-SB00100
^ Support base 07965-SD900
M/T model
1. Remove the set ring (A), outer seal (B), and external snap ring (C).
2. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using a press. Be careful not to damage the bearing support ring (C) on the intermediate shaft during disassembly.
3. Remove the internal snap ring.
4. Press the intermediate shaft bearing (A) out of the bearing support (B) using the half shaft base (C), oil seal driver (D), and a press.
A/T model
1. Remove the set ring (A), outer seal (B), and external snap ring (C).
2. Press the intermediate shaft Al, out of the intermediate shaft bearing (B) using the support base attachment (C), support base (D), and a press. Be careful not to damage the bearing support ring (E) on the intermediate shaft during disassembly.
3. Remove the internal snap ring.
4. Press the intermediate shaft bearing (A) out of the bearing support (B) using the driver (C), support base attachment (D), support base (E), attachment, 42 x 47 mm (F), and a press.
