Operation CHARM: Car repair manuals for everyone.

Wiper Switch: Service and Repair

Wiper/Washer Switch Test/Replacement

NOTE: The wiper/washer switch is built into the combination switch control unit. For the wiper/washer test, refer to the combination switch control unit input test. Combination Switch Control Unit Input Test

1. Remove the dashboard lower cover.
2. Remove the steering column covers.
3. Disconnect the dashboard wire harness 8P connector (A) from the wiper/washer switch (B), and the combination light switch 12P connector (C).






4. Remove the two screws, then slide out the wiper/washer switch.