Immobilizer Indicator Does Not Go Off

Immobilizer indicator does not go off

1. Turn the ignition switch OFF.
2. Connect the HDS to the data link connector.
3. Turn the ignition switch ON (II), and follow the prompts to the MAIN MENU.
4. At the MAIN MENU enter the IMMOBILIZER, then select the IMMOBILIZER INFORMATION.
5. Do the SYSTEM CHECK with the HDS.

Is N-1 OK indicated?

YES - Replace the gauge control module.

NO - Substitute a known-good immobilizer control unit-receiver, then register it and recheck. If the symptom goes away, replace the original immobilizer control unit-receiver.