Speaker Test/Replacement
Speaker Test/ReplacementTweeter
1. Carefully pry the tweeter grille (A) out from the dashboard. Be careful not to damage the tweeter grille and the dashboard.
2. Disconnect the 2P connector (B) from the tweeter.
3. Remove the tweeter (A) from the tweeter grille.
4. Check the capacitor (B) condition. If any malfunction is found, replace the tweeter.
5. Measure the resistance between the tweeter (A) terminal No. 2 and the outside terminal of the capacitor. There should be about 4 ohms.
6. If the resistance is not as specified, replace the tweeter.
Front Center Speaker
1. Carefully pry the front center speaker grille (A) out from the dashboard. Be careful not to damage the speaker grille and the dashboard.
2. Disconnect the 2P connector (B) from the front center speaker.
3. Remove the front center speaker from the speaker grille.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 4 ohms.
5. If the resistance is not as specified, replace the front center speaker.
Front Door Speaker
1. Remove the door panel.
2. Remove the three mounting screws from the front door speaker (A).
3. Disconnect the 2P connector (B), and remove the front door speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 ohms.
5. If the resistance is not as specified, replace the door speaker.
Rear Speaker
1. Remove the rear shelf.
2. Remove the three mounting screws from the rear speaker (A).
3. Disconnect the 2P connector (B), and remove the rear speaker.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 ohms.
5. If the resistance is not as specified, replace the rear speaker.
NOTE: Align the speaker on the locating tabs (A) of the mounting grommet.
Subwoofer
1. Remove the rear shelf.
2. Remove the four mounting bolts from the subwoofer (A).
3. Disconnect the 2P connector (B), and remove the subwoofer.
4. Measure the resistance between the No. 1 and No. 2 terminals. There should be about 2 ohms.
5. If the resistance is not as specified, replace the subwoofer.