Maintenance Required Lamp/Indicator: Service and Repair

Maintenance Information

NOTE: If you are resetting the display when the oil life is more than 15 %, the maintenance message "SERVICE DUE SOON" will be displayed. Make sure the maintenance items requiring service have been performed before resetting this display.

Reset Procedure
Press and hold the SELECT/RESET button for 10 seconds until you see the maintenance message or "MAINTENANCE RESET." If the maintenance message is displayed, press and hold the SELECT/RESET button again for 10 seconds until you see "MAINTENANCE RESET."

- To reset the display, press the SELECT/RESET button to select "OK." The next time the ignition switch is turned to ON, the display will show "OIL LIFE 100%."
- If you do not want to reset the display, press the < or > side of the INFO button to select "Cancel."

NOTE:
- If the required service is performed and the display is not reset, or if the display is reset without performing the service, the system will not show the proper maintenance levels. This can lead to serious mechanical problems because there will be no record of when maintenance is needed.
- If the indicated maintenance service is not performed and the remaining engine oil life is less than 0 percent, "SERVICE PAST DUE" will display. Have the service performed immediately and make sure to reset the display as previously described.