Carrier Bearing Replacement
Carrier Bearing ReplacementSpecial Tool Required
Installer, 46 mm I.D. 07PAF-0030100
NOTE: After you do this procedure, adjust the differential carrier bearing preload while reassembling the transmission.
1. Check the carrier bearings for wear and rough rotation. If they rotate smoothly and their rollers show no signs of wear, the bearings are OK.
2. Remove the carrier bearings (A) with a commercially available bearing puller (B) and bearing separator (C).
3. Install the new bearings with the 46 mm I.D. installer and a press. Press on each bearing until it bottoms out. There should be no clearance between the bearings and the carrier.
