Countershaft Bearing Replacement
Countershaft Bearing ReplacementSpecial Tools Required
^ Adjustable bearing puller, 45 - 75 mm 07YAC-0010100
^ Attachment, 72 x 75 mm 07746-0010600
^ Driver 07749-0010000
^ Slide hammer, 3/8" - 16 UNF commercially available
1. Remove the bearing set plate (A) from the clutch housing (B).
2. Remove the needle bearing (A) from the clutch housing (B) using the 45 - 75 mm adjustable bearing puller (C) and a commercially available 3/8" - 16 UNF slide hammer (D).
3. Install the new needle bearing (A) using the driver (B) and 72 x 75 mm attachment (C).
4. Install the bearing set plate (A) with bolts (B).
