Mainshaft Disassembly
Mainshaft Disassembly1. Support 6th gear (A) on the steel blocks, and press the mainshaft out of the ball bearing (B).
NOTE: Do not use a jaw-type puller; it can damage the gear teeth.
2. Support 5th gear (A) on the steel blocks, and press the mainshaft out of the 5th/6th synchro hub (B).
NOTE: Do not use a jaw-type puller; it can damage the gear teeth.
3. Support 3rd gear (A) on the steel blocks, and press the mainshaft out of the 3rd/4th synchro hub (B).
NOTE: Do not use a jaw-type puller; it can damage the gear teeth.
4. Support the angular ball bearing on the steel blocks, and press out the mainshaft.
