B1255

DTC B1255: Combination Switch Control Unit Lost Communication with MICU

NOTE: If you are troubleshooting multiple DTC's, be sure to follow the instructions in B-CAN system diagnosis Test Mode A.

1. Clear the DTCs using the HDS.
2. Cycle the ignition switch to OFF, and then back ON.
3. Check for DTCs using the HDS.

Is DTC B1255 indicated?

YES - Go to step 4.

NO - Intermittent failure, MICU is OK at this time. Check for loose or poor connections. If the connections are good, check the battery condition and the charging system.

4. Check for DTCs in the combination switch control using the HDS.

Are DTCs B1055, B1106, B1157, and B1806 also indicated?

YES - Go to MICU input test. MICU Input Test

NO - Replace the combination switch control unit.