DTC 107

DTC 107: TCS Operation

DTC 108: VSA Operation

NOTE: The ABS/VSA indicators do not come on by memorizing the DTC 107 or DTC 108.

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then disconnect the HDS.
4. Test-drive the vehicle.
5. Check for DTCs with the HDS.

Is DTC 107 or DTC 108 indicated ?

YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and retest.

NO - The system is OK at this time. Refer to intermittent failures.