DTC 124

DTC 121, 122, 123, 124: VSA Solenoid

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then disconnect the HDS.
4. Test-drive the vehicle.
5. Check for DTCs with the HDS.

Is DTC 121, 122, 123, or 124 indicated?

YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and retest.

NO - The system is OK at this time. Refer to intermittent failures.