DTC 43

DTC 41, 42, 43, 44: Wheel Lock

1. Turn the ignition switch ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch OFF, then disconnect the HDS.
4. Test-drive the vehicle, and check for brake drag by duplicating city driving at speeds over 30 mph (50 km/h). Use the brakes often.

Do the brakes drag?

YES - Repair the brake drag.

NO - Go to step 5.

5. Check the installation of the appropriate wheel sensor.





Is it correct?

YES - If the DTC does not reappear, the most probable cause for the DTC is that the vehicle might have lost traction on a slippery road and spun around.

NO - Reinstall or replace the wheel sensor.