Vehicle Icon Moves By Itself or Spins When Parked

Vehicle icon moves by itself or spins when parked

NOTE:
- Always check the connectors for poor connections or loose terminals.
- Before troubleshooting, make sure you have the navigation system anti-theft code.
- After troubleshooting, re-enter the anti-theft code, and re-initialize the navigation system.

1. Start the engine.
2. From the main menu, select places, then select any destination, and begin the trip.
3. With the vehicle parked, watch the vehicle icon on the display.

Does the vehicle position icon move by itself?

YES - Go to step 4.

NO - Intermittent failure. The system is OK at this time.

4. Go into the Diagnostic Menu and select "DEMO MODE" test under Functional Setup.

Is "DEMO MODE" set to "YES"?

YES - Set the Demonstration mode to "NO".

NO - Replace the navigation unit.