Radio Stays Powered With the Ignition Switch OFF
Radio stays powered with the ignition switch OFFNOTE: Always check for aftermarket accessories plugged into the vehicle accessory power sockets.
1. Turn the ignition switch ON (II).
2. Push the power switch OFF or turn the ignition switch to LOCK (0) to see if the audio unit turns OFF.
Does the audio unit turn OFF?
YES - Operation is normal.
NO - Go to step 3.
3. Turn the ignition switch to LOCK (0).
4. Remove the audio-HVAC display module. Disconnect the audio unit connector A (20P).
NOTE: Eject all the discs before removing the audio unit to prevent damaging the CD player's load mechanism.
5. Measure the voltage between the audio unit connector A (20P) terminal No. 2 and body ground.
Is there voltage?
YES - Repair short in the wire between No. 32 (7.5 A) fuse in the under-dash fuse/relay box and the audio unit.
NO - Replace the audio unit.