Rear Fender Liner: Service and Repair

Rear Inner Fender Replacement

NOTE: Take care not to scratch the body.

1. Remove the rear inner fender (A).
1. On the front of the wheel arch, remove the screws (B) securing the side sill panel (C) and rear inner fender, and the clip (D) securing the rear inner fender and middle floor undercover (E).
2. On the rear bumper (F), remove the screw (G).
3. From the wheel arch, remove the clips (H, I).
4. Pull the rear inner fender out.






2. Install the inner fender in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.