Fluid Line/Hose: Service and Repair
ATF Cooler Hose Replacement1. Slide the ATF cooler hoses (A) on the ATF filter (B) until they touch the filter housing.
2. Secure the hoses with the clips (C) at 6-8 mm (0.24-0.31 in.) (D) from the filter housing.
3. Slide the ATF cooler hoses (E) over the ATF cooler lines (F).
4. Secure the hoses with the clips (G) at 6-8 mm (0.24-0.31 in.) (H) from the hose ends, and secure the hoses at the ATF cooler with the clips (I) at 2-4 mm (0.08-0.16 in.) (J) from the hose ends.
5. Install the hoses on the clamps (K) at the marks (L).