104-12

VSA DTC Troubleshooting: 104-12

DTC 104-12:

Yaw Rate-Acceleration Sensor Power Source Malfunction

NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information Reading and Clearing Diagnostic Trouble Codes.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II).

4. Check for DTCs with the HDS.

Is DTC 104-12 indicated?

YES -

If DTC 61-11 or 62-11 is indicated, check the battery Testing and Inspection, and troubleshoot the alternator regulator circuit Alternator and Regulator Circuit Troubleshooting. If DTC 61-11 or 62-11 is not indicated, replace the yaw rate-acceleration sensor Service and Repair.�

NO -

Intermittent failure, the system is OK at this time.�