Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706:

Gyro Diag: ECU Temp XX °C

NOTE:

- Check the vehicle battery condition first Testing and Inspection.
- This navigation DTC sets when the navigation unit yaw rate sensor's temperature is out of its specified range.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.
- Do this test only when the vehicle dash temperature is between-4 °F (-20 °C) and 158 °F (70 °C).

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0) and then back ON (II).

3. Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode.

4. Check the System Links.

Is the Yaw Sensor red?

YES -

Replace the navigation unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the navigation DTC, replace the navigation unit Service and Repair.�