46-1

SH AWD DTC Troubleshooting: 46-1

DTC 46-1:

SH-AWD Control Unit Internal Power Supply Circuit (Open or Short)

NOTE: Before you troubleshoot, review the general troubleshooting information Initial Inspection and Diagnostic Overview.

1. Turn the ignition switch to ON (II).

2. Clear the DTC with the HDS.

3. Start the engine.

4. Check for DTCs with the HDS.

Is DTC 46-1 indicated?

YES -

Substitute a known-good SH-AWD control unit Service and Repair and recheck. If the symptom/indication goes away with the known-good SH-AWD control unit, replace the original SH-AWD control unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time.�