Hood Latch: Service and Repair

Hood Latch Replacement

NOTE:

- Take care not to scratch the body or the related parts.
- Take care not to kink the cable.

1. Remove the upper grille Upper Grille Replacement.

2. Remove the bolts, then remove the hood latch cover (A).






3. Disconnect the security hood switch connector (A), then remove the connector clip from the body.






4. Remove the bolts, then remove the hood latch (A) from the body.





5. Disconnect the hood opener cable (B) from the hood latch.

6. Install the latch in the reverse order of removal, and note these items:

- Apply multipurpose grease to the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected properly and the security hood switch connector is plugged in properly.
- If necessary, do the hood latch adjustment procedure.
- Make sure the hood opens properly and locks securely.