Front Inner Fender Replacement

Front Inner Fender Replacement

Special Tools Required

- Push Push Pin Puller 07AAC-SJAA100

NOTE:

- Use the special tool to remove the clips.
- Take care not to scratch the body or the related parts.
- Put on gloves to protect your hands.

1. Remove the front inner fender (A).

1. Remove the screws (B) and the clips (C) from the rear of the front wheel arch, then remove the splash guard (D) (Canada models).

2. From under the front bumper (E), remove the bolts (F, G) securing the front bumper, the splash shield (H), and the front inner fender. Remove the clip (I) securing the front bumper and the front inner fender.

3. From the wheel arch, remove the clips (J, K) and the screw (L) securing the front inner fender (and splash shield) to the body.

4. Release the hook (M) of the splash shield, then remove the front inner fender.





2. Install the inner fender in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.