Drink Holders: Service and Repair

Rear Seat Armrest Beverage Holder Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Release the hooks (A), then remove the beverage holder cover (B).






2. Remove the screws, then pull out the beverage holder (A) to release the hooks (B).





3. Install the beverage holder in the reverse order of removal, and push the hooks into place securely.