Rear Seat Head Restraint Replacement

Rear Seat Head Restraint Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the rear seat-back Rear Seat Removal / Installation.

2. Remove the seat-back cover/pad Rear Seat-Back Cover Replacement.

3. Disconnect the connector (A), and detach the connector clip (B) from the seat-back frame. Detach the wire harness clip (C), and remove the harness band (D) (right side head restraint only).






4. Remove the retainers (A) from both head restraint guides (B), then remove the head restraint (C). Remove both head restraint guides.





5. Install the head restraint in the reverse order of removal, and push the clip into place securely.