Seat Heater Test (Ventilated Seats)

Seat Heater Test

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or servicing.

Driver's Seat

1. Remove the driver's seat Front Seat Removal / Installation, then remove the seat-back cover Service and Repair.

2. Disconnect the 5P connector (A) from the seat cushion heater and 2P connector (B) from the seat-back heater.










Seat Cushion Heater Test

3. Check for continuity between seat cushion heater 5P connector terminals No. 2 and No. 3. There should be continuity. If there is no continuity, replace the seat cushion heater.

4. Check for continuity between seat cushion heater 5P connector terminals No. 1 and No. 4. There should be continuity, replace the seat cushion heater.

Seat-Back Heater Test

5. Check for continuity between seat-back heater 2P connector terminals No. 1 and No. 2. There should be continuity. If there is no continuity, replace the seat-back heater.

6. Reconnect the 5P and 2P connectors to the seat heaters, and check for continuity between seat cushion heater 5P connector terminal No. 5 and seat-back heater 2P connector terminal No. 2. There should be continuity. If there is no continuity, repair an open in the wire between the seat cushion heater and the seat-back heater.

Front Passenger's Seat

1. Remove the front passenger's seat Front Seat Removal / Installation.

2. Disconnect the 5P connector (A) from the seat cushion heater.





3. Check for continuity between seat cushion heater 5P connector terminals No. 2 and No. 3. There should be continuity. If there is no continuity, replace the seat cushion heater.

4. Check for continuity between seat cushion heater 5P connector terminals No. 1 and No. 4. There should be continuity. If there is no continuity, replace the seat cushion heater.