Valve, Spring, and Valve Seal Removal

Valve, Spring, and Valve Seal Removal

Special Tools Required

- Valve Spring Compressor Attachment 07757-PJ1010A

NOTE: Identify the valves and the valve springs as they are removed so that each item can be reinstalled in its original position.

1. Remove the cylinder head Cylinder Head Removal.

2. Using an appropriate-sized socket (A) and a plastic mallet (B), lightly tap the spring retainer to loosen the valve cotters.






3. Install the valve spring compressor attachment and the valve spring compressor. Compress the spring and remove the valve cotters.





4. Remove the valve spring compressor and the valve spring compressor attachment, then remove the spring retainer, the valve spring, and the valve.

5. Install the valve guide seal remover (A).






6. Remove the valve seal.





7. Remove the valve spring seat.