A/C Condenser Fan Circuit Troubleshooting - Short

A/C Condenser Fan Circuit Troubleshooting - Short

NOTE: A short in the A/C condenser fan circuit causes the fan to run constantly whenever the ignition switch is ON (II).

1. Disconnect the A/C condenser fan motor 2P connector from the RFC unit.

2. Check for continuity between A/C condenser fan motor 2P connector terminal No. 2 and body ground.





Is there continuity?

YES -

Repair a short in the wire between A/C condenser fan motor 2P connector terminal No. 2 and body ground.�

NO -

Replace the RFC unit RFC Unit Replacement.�