Fog/Driving Lamp: Service and Repair
Fog Light Replacement
Bulb Replacement
1. Remove the bolts and clip, then push up the splash shield.
2. Disconnect the 2P connector (A) from the fog light (B).
3. Turn the bulb socket (C) 45 ° counterclockwise to remove it from the housing.
4. Install a new bulb in the reverse order of removal.
Replacement
1. Remove the front bumper Front Bumper Removal / Installation.
2. Remove the front bumper duct trim .
3. Remove the screws, then remove the fog light (A).
4. Install the parts in the reverse order of removal.
5. After replacement, adjust the fog lights at the adjuster (A) to local requirements.