Fuel Filter: Service and Repair

Fuel Filter Replacement

The fuel filter should be replaced whenever the fuel pressure drops below the specified value Testing and Inspection, after making sure that the fuel pump and the fuel pressure regulator are OK.

NOTE: If the fuel tank is full, drain the fuel Service and Repair.

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the fuel filter set (A).





3. Check these items before installing the fuel tank unit:

- When connecting the wire harness (B), make sure the connection is secure and the connectors are firmly locked into place.
- When installing the fuel gauge sending unit (C), make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.

4. Install the parts in the reverse order of removal with a new base gasket (D) and a new O-ring (E).

NOTE:

- Coat the O-ring with clean engine oil; do not use any other oils or fluids.
- Do not pinch the O-ring during installation.
- Use all the new parts supplied in the fuel filter replacement kit.