Door Switch: Testing and Inspection

Door Switch Test

Driver's Door

1. Remove the driver's door panel Front Door Panel Removal/Installation.

2. Disconnect the 2P connector (A) from the door switch (B).





3. Check for continuity between terminals No. 1 and No. 2.

- There should be continuity with the door open.
- There should be no continuity with the door closed.

4. If the continuity is not as specified, replace the door lock actuator.

Front Passenger's and Rear Doors

1. Remove the front passenger's door panel Front Door Panel Removal/Installation or rear door panel Rear Door Panel Removal / Installation.

2. Disconnect the 2P connector (A) from the door switch (B).





3. Check for continuity between terminals No. 1 and No. 2.

- There should be continuity with the door open.
- There should be no continuity with the door closed.

4. If the continuity is not as specified, replace the door lock actuator.