Removal and Replacement

Alternator Removal and Installation

Removal

1. Do the battery terminal disconnection procedure Procedures.

2. Remove the upper grille cover Upper Grille Cover Replacement.

3. Raise the vehicle on the lift.

4. Remove the splash shield Service and Repair.

5. Remove the ground cable (A), the harness clamps (B) and the connector clamp (C) from the A/C condenser fan shroud.





6. Loosen the two bolts (D) securing the A/C condenser fan shroud.

7. Lower the vehicle on the lift.

8. Remove the RFC unit RFC Unit Replacement.

9. Remove the coolant reservoir (A).





10. Remove the two bolts (B), then remove the A/C condenser fan shroud.

11. Remove the drive belt Service and Repair.

12. Disconnect the alternator connector (A) and the positive alternator cable (B) from the alternator.





13. Remove the bolt (C) securing the harness holder.

14. Remove the mounting bolt (A) and the alternator bracket mounting bolt (B), then remove the alternator.






Installation

1. Install the alternator.






2. Connect the alternator connector (A) and the positive alternator cable (B) to the alternator.





3. Install the bolt (C) securing the harness holder.

4. Install the drive belt Service and Repair.

5. Install the A/C condenser fan shroud (A), and tighten the bolts.





6. Install the coolant reservoir (B).

7. Install the RFC unit RFC Unit Replacement.

8. Raise the vehicle on the lift to full height.

9. Tighten the two bolts (A) securing the A/C condenser fan shroud.





10. Install the ground cable (B), the harness clamps (C), and the connector (D) to the A/C condenser fan shroud.

11. Install the splash shield Service and Repair.

12. Lower the vehicle on the lift.

13. Install the upper grille cover Upper Grille Cover Replacement.

14. Do the battery terminal reconnection procedure.