B1792

DTC Troubleshooting: B1792

DTC B1792:

HandsFreeLink control module error

NOTE: Check the vehicle battery condition first Testing and Inspection.

1. Connect the HDS to the DLC Initial Inspection and Diagnostic Overview.

2. Clear the DTCs with the HDS.

3. Turn the ignition switch to LOCK (0) and then back to ON (II), or press the engine start/stop button to select the OFF mode and then the ON mode.

4. Check for DTCs with the HDS.

Is DTC B1792 indicated?

YES -

Replace the HandsFreeLink control unit Service and Repair.�

NO -

Intermittent failure, the system is OK at this time.�