44-41
SH AWD DTC Troubleshooting: 44-32, 44-41
DTC 44-32:
SH-AWD Control Unit Power Supply Stuck ON
DTC 44-41:
SH-AWD Control Unit Power Supply Stuck OFF
NOTE: Before you troubleshoot, review the general troubleshooting information Initial Inspection and Diagnostic Overview.
1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
2. Clear the DTC with the HDS.
3. Start the engine.
4. Check for DTCs with the HDS.
Is DTC 44-32 or 44-41 indicated?
YES -
Update the SH-AWD control unit if it does not have the latest software SH-AWD Control Unit Update, or substitute a known-good SH-AWD control unit Service and Repair, and recheck. If the symptom/indication goes away with the updated SH-AWD control unit, troubleshooting is complete. If the symptom/indication goes away with a known-good SH-AWD control unit, replace the original SH-AWD control unit Service and Repair.�
NO -
Intermittent failure, the system is OK at this time.�