Keyless Access LF Antenna (Door and Trunk) Test (With Keyless Access System)

Keyless Access LF Antenna (Door and Trunk) Test

NOTE: Before testing, check for DTCs. If any DTCs are indicated, troubleshoot the indicated DTCs first.

1. Connect the HDS to the data link connector (DLC).

2. Press the engine start/stop button to select the ON mode.

3. Select the ONE-PUSH START from the SYSTEM SELECTION MENU with the HDS.

4. Select the SELF CHECK and if any malfunction is found, troubleshoot it first.

5. Select the FUNCTIONAL TESTS, and do the antenna driving test by checking the transmitting areas (A) between the LF antenna and the remote.





NOTE:

- Check the LF antennas one at a time; function Test cannot operate at the same time.
- Test the transmitting area at about 35.4 in (90 cm) height from the ground.
- The LED will blink when the remote is within the shaded areas.