Part Two

AcuraLink System Description

How to Delete Stored AcuraLink Messages

The AcuraLink Satellite Communication System stores and displays these types of messages on the navigation system display screen:

- Feature Guide info
- System malfunction info
- Driver warnings
- DTCs
- Quick tips

NOTE:

- To delete any stored AcuraLink messages, follow these procedures. The first procedure is for your client. It lets them delete certain types of messages. The second procedure is for technicians. It lets you delete all stored messages.
- The diagnostic menu includes a DATA RESET function. Select this only at TQI and when the vehicle changes ownership. It deletes all AcuraLink messages, log data, and AcuraLink registration. If you select DATA RESET during the 45-days activation period, the AcuraLink Feature Guide repeats the first message. AcuraLink messages related to a repair should be deleted after that repair is done. If you don't delete these messages, they stay in your client's AcuraLink message log.

Message Delete Procedure

Client

- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

- Touch OK on the disclaimer screen.

- Press the INFO button to bring up the Information screen.

- Use the interface dial to select �V�1 All Messages.

- Select the item number you want to delete, then select Delete. (If you don't see Delete on the display screen, you can't remove this message.)

- Select Yes to confirm your choice.

Message Delete Procedure

Service Tech

- Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

- Touch OK on the disclaimer screen.

1. Press and hold the MAP/GUIDE, CANCEL, and MENU buttons at the same time for 3 seconds more, and the self-diagnosis begins.






1. Using the interface dial, select the XM (HIP) from the Detail Information & Setting. Press the interface dial. Select XM (HIP) Diag (A) from XM (HIP) SystemLink.





2. Select Diagnostic Info.

3. Select the item you want to delete. After the message and date come up, select Delete.

4. Select Yes to confirm your choice.

5. Repeat step 6 and 7 for each message you want to delete.

AcuraLink Control Unit (XM Receiver) Connector for Inputs and Outputs





ACURALINK CONTROL UNIT (XM RECEIVER) CONNECTOR A (32P)





AcuraLink Control Unit (XM Receiver) Connector A (32P)





AcuraLink Control Unit (XM Receiver) Connector A (32P)










ACURALINK CONTROL UNIT (XM RECEIVER) CONNECTOR B (2P)





AcuraLink Control Unit (XM Receiver) Connector B (2P)